Large beam profiler [50 mm / For VL]

Large-aperture beam profiler [50 mm / For visible light]
（Large beam profiler）
LBP-B50VIS-U(USB) / LBP-B50VIS-G(GigE)

This is the product page for the LBP-B50VIS-U, a large-aperture, high-power beam profiler. The LBP-B50VIS-U is a　large-beam profiler capable of measuring, evaluating, and analyzing lasers with a maximum aperture of 50 mm × 50 mm and a maximum power density of 100 W/cm2. The LBP-B50VIS-U is an unparalleled optical product capable of measuring the largest beams in the world. It can cover large beam diameters on a single screen, eliminating the need for split measurements for beam diameters up to 50 mm × 50 mm.

*Model numbers vary depending on the interface.

Features

Light receiving surface dimensions: 50 mm × 50 mm
Optical resolution: approx. 100 μm
Measurement wavelength range: 400 nm to 1100 nm (532 nm or 1060 nm)
Laser measurement up to high output is possible (0.1 W/cm2 to 100 W/cm2)
With a function to reduce speckle (sparkling light and dark spots)
Beam profiler analysis app(LaseView )included
Interface GigE Type: LBP-B50VIS-G
(Basic specifications are the same as LBP-B50VIS-U)

LBP-B50VIS-U Specifications

Light receiving surface size	50 mm × 50 mm
Optical resolution	Around 100 μm（※1）
Measurement wavelength range	400 – 1100 nm（Focus is made with 532 nm or 1060 nm）
Camera power supply	Camera power supply 5 V About 250 mA (supplied from the USB) Motor power supply 6 V 100 mA or less (supplied from the included AC adapter)
Size(mm)	W154 × H82.5 × D130(Excluding stand, cable and AC adapter)
Weight	2 kg or less(Excluding stand, cable and AC adapter)
Software	Comply with LaseView
Remark	In case of using small beam diameter, sufficient resolution is not available. Please make beam diameter 5 mm and over on your use. Frame rate decrease depending on the PC’s Computing ability or USB terminal‘s connection. In case of using speckle reduction function, 10 – 20 image averaging process is required and 1 – 2 second (typical) measurement time is needed.
Price	contact us
Delivery time	contact us

※ 1 Typically, the resolution as specified is obtained over the entire light-receiving surface. However, the inspection before shipment is limited to the center.

External Dimensions（LBP-B50VIS-U）

LBP-B50VIS

LBP-B50VIS-G Specifications

Interface: GigE type(Basic specifications are the same as LBP-B50VIS-U above. Only differences are listed.)

Flame rate	Max. 30 fps
Exposure time	10 μs ~ 30 s
Interface	GigE（RJ-45 connector）
Camera power supply	12 V, approx. 400 mA (Supplied from the included AC adapter) or 48 V (Supplied from a PoE-compatible device via LAN cable)
Motor power supply	6 V, 100 mA or less (Supplied from the included AC adapter)
External dimensions (mm)	W168 × H82.5 × D130 (Excluding stand, cable, and AC adapter)
Remark	LAN cable is not included. Cat6 or higher cable is recommended.
Price	contact us
Delivery time	contact us