Large-aperture beam profiler [50 mm / For High-power/visible light]
LBP-B50VIS-HP-U
The LBP-B50VIS-HP-U achieves an incident power density of 10 kW/cm², 100 times higher than conventional models, by employing a high-heat-resistant ceramic screen on the light-receiving surface. The LBP-B50VIS-HP-U maintains the key features of the standard LBP-B50VIS-U beam profiler, including a maximum aperture of 50 mm × 50 mm, while enabling measurement, analysis, and evaluation of higher-power beams, enhancing its convenience.
Features
- Light receiving surface dimensions: 50 mm × 50 mm
- Optical resolution: approx. 100 μm
- Measurement wavelength range: 400 nm – 1100 nm
- Laser measurement up to high output is possible (10 W/cm2 to 10 kW/cm2).
- With a function to reduce speckle (sparkling light and dark spots)
- Beam profiler analysis app(LaseView )included
specification
| Light receiving surface size | 50 mm × 50 mm |
|---|---|
| Optical resolution | Around 100 μm（※1） |
| Indication of measurement power density | 10～100 kW/cm2 |
| Total incident power | Maximum 10 W |
| Incident power density | Up to 100 kW/cm2(High heat resistant screen) |
| Allowed incident light angle | ±15° |
| Measurement wavelength range | 400～1100 nm（Focus is made with 532 nm） |
| Image sensor pixel(mm) | 1440 × 1080（Horizontal × vertical） |
| Acquisition image pixel | 1250 × 1250（Horizontal × vertical） |
| A/D Conversion resolution | 8 / 12 bit |
| Frame rate | 160 fps |
| Exposure time | 1 μs～30 s |
| Interface | USB3.0（miniB terminal） |
| External trigger | Yes（3.3～12 V / 820 Ω） |
| Power supply | Camera power supply 5 V, About 660 mA (supplied from the USB) Motor power supply 6 V, 100 mA or less (supplied from the included AC adapter) |
| Size(mm) | W154 × H82.5 × D164 (Excluding stand, cable and AC adapter) |
| Weight | 2 kg or less(Excluding stand, cable and AC adapter) |
| Software | Comply with LaseView |
| Remark |
|
| Price | contact us |
| Lead time | contact us |
※ 1 Typically, the resolution as specified is obtained over the entire light-receiving surface. However, the inspection before shipment is limited to the center.
