LaseView lineup

Beam profiler software with M2 platform

  • LaseView allows to reduce costs
  • Can be used with the camera you already own
  • Easy setup by just installing it on your PC

What is LaseView-LHB ?

LaseView-LHB is a laser beam profiler for large diameter and high power laser beams working on Windows systems.
Thanks to a newly-developed optical setup, it is the first product to provide measurements for both large diameter and high power laser beams. This versatile lone product offers a wide range of applications.
It works with the LaseView software, which is known for its great usability.
Equipped with different analysis capabilities, it is a very easy-to-use beam profiler.


Figure1 LaseView-LHB (Entrance window side and connection side)


Figure2 808nm single-mode semiconductor laser’s diverging light (FWHM: 14.4mmx2.3mm)


  • Measures easily the beam profile and diameter
  • Can measure from small to large diameters (2μm *~ 100 mm **) (* with optional accessory / ** on custom products)
  • Can measure from low to high powers (1mW/cm2~100 W/cm2)
  • Includes Speckle reduction function (patterns of bright and dark spots)
  • Includes the “Beam profiler with M2 platform software” LaseView

LaseView software Features:

        • Allows the use of low-cost cameras
        • Available the low-cost beam monitoring system
        • Measures M2 beam quality
        • Measures the beam Divergence Angle
        • Evaluation of the beam power, beam profile between 2 points, and beam diameter changes available
        • Measures the beam Pointing Stability over time
        • Image figure(Beam diameter:around 15mm)


スクリーンショット 2016-07-05 13.07.00          スクリーンショット 2016-07-05 13.07.27

Measurement setup of a Beam of ~15mm and the corresponding software screenshot


Comparison between LaseView-LHB and conventional products

For high power

Conventional Beam profiling measurement with high power laser needed damping system because CCD camera may be easily destroyed.
LaseView-LHB can measure as much as maximum 100 W/cm2 laser beam without additional attenuation system by using a newly designed optical system.
It simplifies optical system and prevents introducing distortion on laser beam.

スクリーンショット 2015-04-20 18.06.05

Left : Beam profiling with dumped system.

Right: Beam profiling with at one time with LaseView-LHB

Figure 4 (by ASUKA MEDICAL Inc)

For large diameter

Until now, Beam profiling measurement with large diameter has required measuring by dividing it in several parts by making handy movement on the conventional profiler.
It takes time and energy and also, divided measurement makes laser relative intensity unclear.

LaseView-LHB solves such problems and it becomes possible to make large beam profiling at one time (Figure3)

スクリーンショット 2015-04-20 17.50.23

Left : Beam profiling by divided measurement

Right: Beam profiling at one time by LaseView-LHB

Figure 3 (by ASUKA MEDICAL Inc)

laseview_button  paypal accepted here


Main Analysis Functions

2 beam quality Analysis function

It is an important parameter for focus or processing, it can be easily measured with standard methods. The procedure of the optical system setting is described below:

      1. The laser beam shall be focalized through a lens with f-number (focal length/beam diameter) between ~50 to ~100.
      2. Install a ruler or an optical rail along the beam so that the CCD camera can slide in a range of ±50mm~±150mm around the beam waist.
      3. click on the “Collective analysis” of the “M2 beam quality” tab.

See the “About beam profiler” tab for more information.

LaseView-M2-screenFig5: M2 measurement screen

Divergence angle Analysis function

Beam divergence angle is an important parameter for light propagation characteristics which can be easily measured with a standard method. Its measurement’s procedure is described below:

      1. Measurements taken at 2 or more positions shall be saved in the same folder.
      2. Click the “Divergence angle” button of “Collective analysis” tab .


Fig6: Beam divergence angle measurement screen

In addition, as the measurements are made at different places, it is possible to evaluate the change in power and thus the propagation loss.

Beam pointing variation Analysis function

The Beam pointing stability varies with time and is an important parameter for Laser Beam stability which can be easily measured with a standard method. Beam pointing measurement procedure is described below.

      1. Use the image logging function, and save images taken at an appropriate time interval.
      2. Click the “Pointing” button.
      3. Click the “Execute analysis”.

The changes over time of X and Y coordinates of the beam centroid will be displayed in a graph.


Fig7: Beam pointing stability screen


With LaseView-LHB, the measured large diameter beam illuminates an entrance window, the light diffused from the window is recorded by a CCD camera at the rear, which allows to measure large diameters. After several experiments, by using a particular window, the direct input of high-intensity beams of more than 100 W/cm2 was made possible and we succeeded in achieving both a high resolution and a uniform sensitivity.


Item Specification
Acceptance surface size 50 mm × 50 mm*
Optical resolution power below 100 μm
Measurement power density 0.1~100 W/cm2(sensitivity is adjustable depending on exposure time)
(1 mW/cm2〜 is available by changing ND filter)
Total irradiation power Maximum 10 W
Incident angle tolerance ±15°
wavelength range
400~1100 nm (Focus adjustment already made on 532 nm or 1060 nm)
Effective pixel number 1280 × 960 (horizon ×vertical)
Pixel number of acquired images 1250 × 1250 (horizon ×vertical)
A/D conversion
resolution power
8 bit/12 bit
Frame rate Maximum 30 fps
Exposure time 0.1 ms~250 ms
Interface USB3.0 (miniB connector)
External trigger Available(3.3〜24 V / 3.5 mA)
Electric power ・Camera electric power 5 V and around 250 mA(supplied by USB)
・Motor electric power 6 V and below 100 mA(supplied by attached AC adapter)
External size W154 mm × H82.5 mm × D130 mm(excluding stand and cable)
Weight Below 2 kg(excluding stand , cable and AC adapter)
Software Compliant with LaseView
Remark ・In case of small beam diameters, resolution may be insufficient. Recommended beam diameter is over 5mm.
・Frame rate may be lower depending on PC or USB connection performances.
・Speckle reduction function needs 10~20 image averaging procedure, which generates measurement time by 1-2 seconds

* Maximum beam diameter can reach 100 mm × 100 mm on customized devices.
Infrared wavelength region can also be measurable on customized devices.
We can also provide reduced-size custom devices. Please contact us.

External drawing


Fig8: LaseView-LHB external drawings


Micro-beam measurement camera set

For beam diameters of 30 μm or less, we recommend that you use the micro-beam measurement camera set. It is an incomparable device offering “high magnification, high NA and ultra-low aberration.

small-beam-setFig 9: Micro-beam measurement camera set

      • Magnification: around 30 times (typical values: 30.8 times @1064 nm, 31.5 times @532 nm)
      • NA=0.4
      • Working wavelengths: 400-1100 nm (recommended: 600-1100 nm)
      • Optical resolution: < 2 μm
      • Working distance: around 1.7 mm (typical values: 1.7 mm @1064 nm, 1.6 mm @532 nm)
      • Length = 176 mm

Micro-beam measurement camera set and dedicated 3-axis holder stage

In order to easily measure any micrometer-sized beam, a micrometer level positioning 3-axis (x, y, z) stage is necessary.


Fig 9: Micro-beam measurement camera set and 3-axis stage

      • Micro positioning device mounting: side
      • Moving guide: ball guide
      • Motion / 1 rotation: 0.5 mm
      • Micrometers smallest graduation: 0.01 mm
      • Motion range (mm): XY axes ±6.5; Z axis ±5
      • Can be installed on M6 tapped breadboard


      • Beam profile measurement for large diameter
      • Beam profile measurement for high power laser
      • Measurement for Laser far field pattern (FFP)
      • Measurement for Laser near field pattern (NFP)
      • Beam profile measurement for laser processing
      • Beam profile measurement for surgical laser
      • Measurement and evaluation of  CW (continuous wavelength) and pulse LED emission
      • Measurement and evaluation of beam of semiconductor laser emission
      • Measurement and evaluation of beam of optical pick-up sources
      • Measurement and evaluation of NA of optical fiber
      • Measurement of propagation loss, beam profile or divergence angle for artificial star and distance measurement laser devices of astronomical telescopes
      • Lensometer
      • Beam monitoring system of long-distance propagating laser

Price and lead time

Product Model number Catalog User guide Price Lead time
Beam profiler for large diameter and high power laser (50 mm × 50 mm) LaseView-LHB pdf pdf  US$ 14,800 (Ex-works Japan)(without Tax) Around 1-1.5 month
Beam profiler for large diameter and high power laser (100 mm × 100 mm) LaseView-LHB-100 pdf pdf US$ 19,800 (Ex-works Japan)(without Tax)
Micro-beam measurement camera set LaseView-LHB-camera + US$ 2,300(without Tax)
Micro-beam measurement camera set and 3-axis stage LaseView-LHB-stage + US$ 1,700(without Tax)